PVI Industries QUICKDRAW PV500-26 User Manual

PV500-26 10/07 INSTALLATION & MAINTENANCE MANUAL QuickDraw® Storage and Semi-instantaneous Boiler Water Heaters Installation and service mus

QUICKDRAW® Boiler Water Heater 10 4. When replacing the heat exchanger head, use a torque wrench to tighten the bolts/studs and nuts. Use the foll

QUICKDRAW® Boiler Water Heater 2 CHECKING EQUIPMENT BEFORE YOU INSTALL Inspect the unit completely upon receipt from the freight carrier before sig

QUICKDRAW® Boiler Water Heater 3 INSTALLATION WARNING: Use industry standard safe rigging methods when attempting to lift or move this product. F

QUICKDRAW® Boiler Water Heater 4 Typical QuickDraw® Storage Construction Typical QuickDraw® Instantaneous Construction 1. U-tube Heat Ex

QUICKDRAW® Boiler Water Heater 5 IMPORTANT SAFETY NOTE It takes only 5 seconds of skin contact with 140°F water to cause a second degree burn! Y

QUICKDRAW® Boiler Water Heater 6 WATER INLET / OUTLET CONNECTIONS Important: Do not use galvanized or steel pipe nipples when making waterside con

QUICKDRAW® Boiler Water Heater 7 3. When the demand is satisfied, the limit operating circuit opens and the valve actuator is de-energized. The

QUICKDRAW® Boiler Water Heater 8 6. In all installations, there should be no pulsation or water hammer since this causes vibration and strain with

QUICKDRAW® Boiler Water Heater 9 and cleaning frequency is established, initially inspect the tank every six months or more frequently if higher sc